生物组织光学特性的测量方法及医学应用

对生物组织光学特性参数的测量方法及其在医学上的应用进行了全面论述,分析了测量误差的来源,结果表明测量结果的客观性取决于模型假设（如散射的各向同性或异性、边界的匹配与否等）、测量技术、实验装置、定标方法和介质非均匀性等。测量方法可用于诊断生物组织的生理病理状态和测量组织结构     

Sap flow measurements in grapevines (Vitis vinifera L.) 2. Granier measurements

The Granier-system, a relatively simple and continuous method for measuring sap flux density, has been adapted and evaluated for its use in older, mature grapevines. The original calibration of Granier (1985, Annales Sciences Forestieres, 42, 193-200) could be extended to a sap flux density of up to 400 10^-6 m³ m^-2 s^-1 with only little error at high flux densities. A time lag of around 20 min was apparent between transpiration and calculated sap flow which was attributed to the thermal mass of the sensors themselves. The time lag and the consequently dampened response of the system caused a very low accuracy over short time periods thus reducing the value for detailed plant physiological investigations. However, when integrating over longer time intervals, much of the error cancelled out. For daily values the maximum error was within ±10% and after a period of 89 days only 1.5% error remained. This method is thus best suited for long term measurements of total water use. This revised version was published online in June 2006 with corrections to the Cover Date.     

Evaluation of a cDNA scanning method concerning the fidelity and efficiency of cDNA selection using the YAC CIC3B1-S region of Arabidopsis thaliana chromosome 5.

We previously reported a cDNA selection method using DNA latex particles to identify expressed genes in specific regions of genomes and named this cDNA scanning method (Hayashida et al., 1995 Gene 155 161). We applied the cDNA scanning method to the YAC CIC3B1-S DNA on Arabidopsis thaliana chromosome 5, and constructed a region-specific sublibrary in which cDNAs for genes on the YAC CIC3B1-S DNA were concentrated. We isolated 545 cDNA clones from the sublibrary, and determined partial sequence of them to produce expressed sequence tags (ESTs) derived from the YAC region. In total, 74 nonredundant groups of cDNAs were obtained from 545 cDNA clones. Forty-seven percent of these EST clones had significant homology to functional proteins such as protein kinases, LON protease, nucleic acid binding protein and chloride channel protein. We compared the cDNA sequences isolated by the cDNA scanning method to the Arabidopsis genomic sequence corresponding to the YAC CIC3B1-S region, and found that 69% of the selected cDNAs are located in the region. We discuss the fidelity and efficiency of the cDNA scanning method for cloning region-specific cDNAs and its useful application in positional cloning.     

Modeling heterogeneity in nest survival data

Current statistical methods for estimating nest survival rates assume that nests are identical in their propensity to succeed. However, there are several biological reasons to question this assumption. For example, experience of the nest builder, number of nest helpers, genetic fitness of individuals, and site effects may contribute to an inherent disparity between nests with respect to their daily mortality rates. Ignoring such heterogeneity can lead to incorrect survival estimates. Our results show that constant survival models can seriously underestimate overall survival in the presence of heterogeneity. This paper presents a flexible random-effects approach to model heterogeneous nest survival data. We illustrate our methods through data on redwing blackbirds.     

Long-term release of clodronate from biodegradable microspheres

This paper describes the formulation of a biodegradable microparticulate drug delivery system containing clodronate, a bisphosphonate intended for the treatment of bone diseases. Microspheres were prepared with several poly(D,L-lactide-co-glycolide) (PLGA) copolymers of various molecular weights and molar compositions and 1 poly(D,L-lactide) (PDLLA) homopolymer by a water-in-oil-in-water (w/o/w) double emulsion solvent evaporation procedure. Critical process parameters and formulation variables (ie, addition of stabilizing agents) were evaluated for their effect on drug encapsulation efficiency and clodronate release rate from microparticles Well-formed clodronate-loaded microspheres were obtained for all polymers by selecting suitable process parameters (inner water/oil volume ratio 1∶16, temperature-raising rate in the solvent evaporation step 1°C/min, 2% wt/vol NaCl in the external aqueous phase). Good yields were obtained in all batches of clodronate microspheres (above 60%); drug encapsulation efficiencies ranged between 49% and 75% depending on the polymer used. Clodronate release from all copolymer microspheres was completed in about 48 hours, while those from PDLLA microspheres required about 20 days. The change of microsphere composition by adding a surfactant such as Span 20 or a viscosing agent such as carboxymethylcellulose extended the long-term release up to 3 months. Clodronate was successfully entrapped in PLGA and PDLLA microspheres, and drug release could be modulated from 48 hours up to 3 months by suitable selection of polymer, composition, additives, and manufacturing conditions. Published: July 11, 2001.     

New technique in optical resolutions

The present paper illustrates the development of an advanced technique in optical resolution. Both of the amphetamine enantiomers can be obtained by a two-step distillation in nearly quantitative yield without any loss of the resolving agent. It is proved that the second-order interactions (H-bond) are sufficient for separation of enantiomers by distillation. © 1994 Wiley-Liss, Inc.     

Bifurcation analysis of periodic SEIR and SIR epidemic models

The bifurcations of the periodic solutions of SEIR and SIR epidemic models with sinusoidally varying contact rate are investigated. The analysis is carried out with respect to two parameters: the mean value and the degree of seasonality of the contact rate. The corresponding portraits in the two-parameter space are obtained by means of a numerical continuation method. Codimension two bifurcations (degenerate flips and cusps) are detected, and multiple stable modes of behavior are identified in various regions of the parameter space. Finally, it is shown how the parametric portrait of the SEIR model tends to that of the SIR model when the latent period tends to zero.     

Measurement of k(L)a by dynamic pressure method in pilot-plant fermentor

The dynamic pressure method (DPM) is used for measurement of k(L)a in a 1-m(3) pilot scale fermentor in coalescing (distilled water) and noncoalescing (0.3 M Na(2)SO(4) aqueous solution) batches. The method consists in recording oxygen concentration in a batch after a small pressure change (20 kPa) in the fermentor. The upward pressure change is brought about by temporary closing and subsequent throttling of outlet gas stream and the downward change by full reopening of the gas outlet. Absorption of pure oxygen yields the same k(L)a values as absorption of air. In noncoalescing batch, the downward k(L)a values are always higher than the upward values owing to spontaneous nucleation of bubbles. The experiments performed in a stirred cell confirm this behavior. Thus, only upward pressure change should be used for measurement. The correlation of k(L)a data measured in small (18-L) and large (1000-L) vessels based on power dissipated and superficial gas velocity are in a good agreement. Unlike the DPM, the classical dynamic methods yield, under the same conditions, excessively low values of k(L)a (the dynamic startup method) or fail to produce data at all (the dynamic method with interchange of air for N(2)). (c) 1994 John Wiley & Sons, Inc.     

The posterior probability distribution of alignments and its application to parameter estimation of evolutionary trees and to optimization of multiple alignments

How to sample alignments from their posterior probability distribution given two strings is shown. This is extended to sampling alignments of more than two strings. The result is first applied to the estimation of the edges of a given evolutionary tree over several strings. Second, when used in conjunction with simulated annealing, it gives a stochastic search method for an optimal multiple alignment.Correspondence to: L. Allison